SunMac – Cationic Polymer Supplier in Surat
Metal-salt coagulants add weight to Surat's heavy textile sludge. SunMac can replace part of the coagulant and cut what goes to disposal.
Heavy sludge at Pandesara and Sachin
Surat's dyeing and printing units send hot, coloured effluent to common plants at Pandesara and Sachin. Flows into these plants are large and variable and the sludge is heavy, so a cationic polymer is used to condition it ahead of the filter press.
The coagulant adds to the problem: a metal salt contributes its own weight to the sludge.
Documents for SunMac SC04
A lighter route
SunMac SC04 can replace part of the coagulant in many plants, cutting the sludge sent for disposal. It works as the first stage, neutralising charge on fine solids. The dye itself still needs SunDec, covered on SunDec for Surat, and the floc is built by a cationic Sunfloc grade.
Measure the result in a plant trial, since the saving depends on your effluent.
Supply to the Tapi belt
The Gujarat Pollution Control Board regulates units here. Road freight from Chennai covers about 1,610 km through Bengaluru, Pune and Mumbai and usually takes about four days.
SunMac questions from Surat
Can SunMac replace all my coagulant?
Rarely all of it. In many plants it replaces part, and a trial finds the balance.
Does it remove disperse dye colour?
No. Colour removal is SunDec's job.
How is it packed?
In drums, with a 24-month shelf life.
Replacing part of the coagulant
Cut the metal-salt dose in steps and add SunMac, then watch the sludge volume at each step. Stop when the clarity worsens.
SunMac in other cities
More on Surat
Start a SunMac trial in Surat
Dye houses and CETPs in Surat: send a litre of equalisation-tank effluent for a coagulant-reduction trial.